|
|
首页 产品中心MINATO编程器,MINATO
Programmer
您现在的位置:周立功编程器,SmartPRO
Programmer
|
Briefing of
Minato gang programmers
|
|
All of Minato
gang programmers can be operated by
itself as stand-alone without any
control station. This stand-alone
architecture, fast speed programming and
large buffer memory are ideal for mass
production of high-density devices. To
meet the needs of automated production,
optional software XP-ROM is also
available for remote control.
Minato gang programmers support
thousands of devices. Various packages
such as micro BGA, SOP, TSOP, PLCC,
microcontroller are supported by
conversion socket adapters. Minato
supplies over one thousand of socket
adapters to the market.
Minato gang programmers also have
special features and functions as
stand-alone units including LCD,
individual operation keys for Copy,
Erase, Blank, Program, and Continuos
Operation. Other unique features for
demanding professions are BYTE SWAP,
change VCC, protect mode, address mode
to simultaneously program multiple data
on multiple devices (M1893, M1931). All
are available on the operation panel.
|
|
|
Super Fast Programming
|
MODEL 1950
(New)
|
M1950 is Minato’s 22nd
generation gang programmer. It is 7 times faster
than former model. It is equipped with the
standard 4G bits memory that can be added up to
8G bit. For data transfer, USB 2.0 port and
Compact Flash slot are available as standard.
M1950 can simultaneously program 16 pieces of
256M bits NAND flash in less than 40 seconds
with two verify.
|
|
|
Fast Programming
|
MODEL 1940
|
M1940 is fast 16 site
gang programmer supporting NOR, NAND flash, MPU
and other PORM. It is equipped with the standard
256M bits memory that can be added up to 1G bit.
M1940 is Minato’s 20th generation
gang programmer. It is 2-5 times faster than
former model such as M1893 and 1931. Various
package is supported by socket adaptors on DIP.
Most of adaptors are compatible among M1940,
M1894, M1896 (except programmer support for NAND
flash).
|
|
|
MCU
|
MODEL 1896
(New)
|
M1896 is a newly designed
gang programmer which can take 8 pieces of large
adaptors for micro-controllers. Standard SU-816
socket units enable to program either 8 pieces
of 8 bits JEDEC or 16 bits EIAJ devices. It is
equipped with 32M-bytes（256M bits）memories which
can be expanded up to 128M-bytes （1 G bits）.
|
|
|
USB
|
MODEL 1894
|
M1894 gang programmer
equipped with standard 32M-bytes(256M bits)
memory is a high-speed affordable gang
programmer that can program 8 pieces of devices
simultaneously. The memory can be expanded up to
128M bytes(1G bits). The unit, which can be
operated as a standard without any remote
control software and PC, is designed for high
volume production of diversified PROM.
|
|
|
Universal
|
MODEL 1881UXP
|
PC based suitable to edit
programming data for R&D(PC/AT; DOS/V)
supporting devices are PLDS such as MACH, PAL,
GAL and EPROMS/FLASH memories, and also one chip
micro controllers. Packages in SOP, PLCC are
supported by convertors as well.
|
|
|
 |
MODEL 1893
(Discontinued)
|
This is a gang programmer
that has extendable memory from a standard 4
megabytes (32 megabits) to 64 megabytes (512
megabits) maximum and is capable to program 8
devices simultaneously. The MODEL 1893 has made
the best selling MODEL 1930's basic performance
even better and accomplished better cost
performance. The architecture is good for
microcontroller that requires larger adapters.
Minato continues to provide maintenance support.
|
|
|
|
各式编程器,量产型编程器,通用型编程器,专用编程器,HILO编程器,HILO烧录器,西尔特编程器,西尔特烧录器,TOP编程器,TOP烧录器,威龙编程器,威龙烧录器,崇贸编程器,HYNIX专用编程器,SAMSUNG专用编程器
以上产品资料版权均归日本MINATO公司所有
|
产品目录
测试座
